View Full Version : 2nd build

03-19-2016, 07:21 PM
I built a warrior a couple years ago, and it was a good build I just did not get everything perfect with the front wheels, so I was a bit unhappy with it. Time to build a second bike. The Aurora looked like what i wanted, easier front end build, still lcg and underseat steering. I got a parts bike, 20" Full suspension. I do not know if I am going to use the front fork or get a rigid one, but the back stuff will work, I think.

I am going to use some stuff off the Warrior, the 2 20" Wheels, The bottom bracket, USS, the Rear Derailleur.
I got the main frame tacked welded up, the place I work for now has a weld shop and I am going to have them fully weld it up, and also a machine shop so I can get what i need made. I will post pics as i get them

03-21-2016, 07:54 PM
Got a question. What is the length of the shock you are using. the one i have is 6" center to center and it seems short.

03-27-2016, 02:08 PM
Mine is 6" bolt-to-bolt on my Aurora. I measured the other one I have on another project and it is also 6". My are both off of Mongoose bikes (MGX's I think). Mine fit almost at an exact 45-50 degrees installed on the Aurora. See link below for pics.

The Warrior is the fastest trike I have ridden . . .but the Aurora is by far the most comfortable (modified seat)!

RV3maker :wings:

Aurora build link (https://plus.google.com/photos/107830944100278065441/albums/6054177765796192577?banner=pwa)
Warrior build link (https://plus.google.com/photos/107830944100278065441/albums/5781572831651723489?banner=pwa)

04-02-2016, 07:32 PM

http://s26.postimg.org/kvku28mwl/20160319_191655.jpg (http://postimg.org/image/kvku28mwl/)

http://s26.postimg.org/97qs7oxrp/20160319_191723.jpg (http://postimg.org/image/97qs7oxrp/)